(800) 315-5004 Email Us
Locations
Experts in Crushing, Screening, and Conveying Equipment for the Aggregate Industry.

2018 SUPERIOR 72RZTU

2018 SUPERIOR 72RZTU at www.valleyequip.com2018 SUPERIOR 72RZTU at www.valleyequip.com
2018 SUPERIOR 72RZTU at www.valleyequip.com2018 SUPERIOR 72RZTU at www.valleyequip.com
2018 SUPERIOR 72RZTU at www.valleyequip.com2018 SUPERIOR 72RZTU at www.valleyequip.com
2018 SUPERIOR 72RZTU at www.valleyequip.com2018 SUPERIOR 72RZTU at www.valleyequip.com
2018 SUPERIOR 72RZTU at www.valleyequip.com2018 SUPERIOR 72RZTU at www.valleyequip.com
2018 SUPERIOR 72RZTU at www.valleyequip.com2018 SUPERIOR 72RZTU at www.valleyequip.com
All
Photos
Videos

For Sale Price:Call

Description

SUPERIOR RAZERTAIL® TRUCK UNLOADER—Superior’s RazerTail® Truck Unloader directly transfers material from truck to stockpile, removing extra handling to guarantee product quality. The RazerTail® Truck Unloader can reduce your unload times to as little as 60 seconds per truck load. While conventional truck unloaders can require days to install, these portable units take just minutes to be production ready.

Our patented self-cleaning ramps ensure any extra material is fed to the hopper after a truck’s exit, limiting maintenance. The RazerTail® Truck Unloader is often paired with our Telestacker® Conveyor to create a seamless material transfer process.

ADVANTAGES

ONBOARD TRUCK RAMPS—The RazerTail® Truck Unloader is available with modular steel ramps that eliminate the need to build earthen ramps, saving time and money. When you use a traditional truck unloader it takes nearly a ten-hour day, and more than 1,000 cubic yards of material to build the earth ramp. The RazerTail® Truck Unloader’s ramp system extends 7 feet 3 inches on each side with folding pin-connection system, allowing easy access for low-clearance trucks and approximately 85% faster setup and teardown times.

SELF-CLEANING RAMPS—The RazerTail® Truck Unloader drastically reduces unload times. With that speed, it’s important that the unloader is engineered to minimize or eliminate spillage problems. Our engineers tackled this issue by designing patented self-cleaning, hinged hopper ramps that hydraulically rise to a vertical position to dump any spilled material onto the conveyor. Compared to the competition, our higher sidewall design does a better job of containing the load, reducing spillage and saving cleanup time.

AFTERMARKET SUPPORT—As a private company, owned by employees and community members, we put our customers first. To drive this home to our employees, customer service (or Customer WOW! as we refer to it internally) is communicated as one of the three pillars of our company. It means every employee — no matter their position — is considered a customer service agent. Ensuring this pillar is strong is how we measure the strength of our business.

FEATURES

CHEVRON® PULLEY—Ejects fugitive material for longer lasting pulleys and belting.

TAIL PULLEY ACCESS—Access steps to operator platform is hinged for convenient access to tail pulley and take-up.

SELF-CLEANING RAMPS—Hydraulically-controlled ramps automatically or manually dump any leftover material into hopper.

DRIVE OVER GRATES—Versus permanently fixed, these bolt on grates can be removed for maintenance

OPERATOR PLATFORM(S)—Equip on one or both sides of hopper area to monitor production

HYDRAULIC POWERFOLD—Inverted design protects cylinder rods from debris during operation.

WRAP DRIVE—Accessible from ground level, the combination of pulleys creates better tensioning and reduced spillage.

TRUSS FRAME—Versus channel frame designs, this robust design is less prone to bending.

ADJUSTABLE HEIGHT DISCHARGE—Maintains structural rigidity under heavy materials and wind loads.

ADJUSTABLE FLOW GATE—You set the height to control the flow of material from the hopper.

IMPACT IDLERS—Rubber cushioned idlers absorb shock to protect belt from falling material.

72-INCH (1,828MM)
● Up to 1,500 STPH (1,339 MTPH)
● Up to 4-inch minus (101mm) materials lumps
● 10-foot (3m) x 7-foot (2.1m) grate unload area
● 5-inch (127mm) grate openings
● Accommodates belly or end dump trucks

72-INCH (1,828MM) HAUL TRUCK
● Up to 2000 STPH (1,786 MTPH)
● Up to 8-inch minus (101mm) materials lumps
● 14’-9” (4.5m) x 7-foot (2.1m) grate unload area
● 9-inch (229mm) grate openings
● Accommodates rigid and articulated 40-ton haul trucks

72 INCH* OPERATING SPECIFICATIONS

Tons Per Hour (tonnes/hour)
1,500 (1,360)
Maximum Material Size (mm)
4” Minus (101)
Cycle Time per Minute (tonnes)
2.5 for 30 Tons (27)
Earth Ramp Height (mm)
25” (635)
Discharge Height (m)
7’-9” (2.3) - 12’-8” (3.8)
Conveyor Length (m)
79’ -10” (24.3)
Conveyor Width (m)
7’ -0” (2.1)
Load Ramp Width (m)
10’ -0” (3.0)
Load Ramp Length (m)
24’ -0” (7.3)

72 INCH* HAUL TRUCK OPERATING SPECIFICATIONS

Tons Per Hour (tonnes/hour)
2,000 (1,814)
Maximum Material Size (mm)
8” Minus (203)
Cycle Time per Minute (tonnes)
2.5 for 40 Tons (36)
Earth Ramp Height (mm)
37” (939)
Discharge Height (m)
7’-9” (2.3) - 12’-8” (3.8)
Conveyor Length (m)
84' -9” (25.8)
Conveyor Width (m)
7’ 0” (2.1)
Load Ramp Width (m)
15’ -5” (4.7)
Load Ramp Length (m)
24’ -0” (7.3)

72 INCH* DUAL LANE OPERATING SPECIFICATIONS

Tons Per Hour (tonnes/hour)
1,500 (1,360)
Maximum Material Size (mm)
4” Minus (101)
Cycle Time per Minute (tonnes)
2.5 for 30 Tons (27)
Earth Ramp Height (mm)
25” (635)
Discharge Height (m)
7’-9” (2.3) - 12’-8” (3.8)
Conveyor Length (m)
91’ -9” (27.9)
Conveyor Width (m)
7’ 0” (2.1)
Load Ramp Width (m)
11’ -1” (3.3)
Load Ramp Length (m)
56’ -6” (17.2)

72 INCH* TRAVEL SPECIFICATIONS

Travel Length (m)
52' -6” (16.0)
Travel Height (m)
12’ -6” (3.8)
Travel Width (m)
11' -10" (3.6)
Weight at Axle (kg)
27,000 (12,245)
Weight at Axle** (kg)
N/A
Weight at Kingpin (kg)
18,000 (8,165)
Weight at Kingpin** (kg)
N/A
Axles
Tandem

72 INCH* HAUL TRUCK TRAVEL SPECIFICATIONS

Travel Length (m)
57' -6" (17.5)
Travel Height (m)
13’ -4” (4.0)
Travel Width (m)
11' -10" (3.6)
Weight at Axle (kg)
26,400 (11,975)
Weight at Axle** (kg)
29,200 (13,245)
Weight at Kingpin (kg)
19,400 (8,800)
Weight at Kingpin** (kg)
24,200 (10,975)
Axles
Tandem

72 INCH* DUAL LANE TRAVEL SPECIFICATIONS

Travel Length (m)
66' -4" (20.2)
Travel Height (m)
15' -11" (4.8)
Travel Width (m)
12' -3" (3.7)
Weight at Axle (kg)
44,000 (19,960)
Weight at Axle** (kg)
N/A
Weight at Kingpin (kg)
39,800 (18,050)
Weight at Kingpin** (kg)
N/A
Axles
Tandem

General Comments

* With Adjustable Discharge, ** Weights including hydraulic onboard truck ramps.

Specifications are subject to change without prior notice.